PIC Programmer

From CircuitsArchive

You do not have permission to edit this page, for the following reasons:

• The action you have requested is limited to users in the group: Users.
• You must confirm your e-mail address before editing pages. Please set and validate your e-mail address through your user preferences.

You can view and copy the source of this page:

==PICALL 3.1== ===Schematic=== [[Image:cir_pic_prog_picall31.gif]] ===PCB=== [[Image:cir_pic_prog_picall31_pcb.gif]] ==P16PRO== ===Description=== As you can see, only a few standard elements are used and the hardware is very simple to build. So here are only a few words about hardware. Supply voltage can be either AC or DC. Voltage Vdd must be between 4.5 and 5.5 V. For this purpose integrated stabiliser 78L05 (Vdd=5V) is used. It has current limitation (protection) 100 mA and with this feature protects inserted PIC from damage in case something is wrong connected. Programming voltage 13V is provided with 78L08, which has pin 2 connected to Vdd (not to the ground) and on his output there is a voltage 5+8=13V. Between PC and PIC (textool) there is a one IC 74LS05 (it can be used 74LS06 or 74LS07 too - you can setup this in P16PRO). Five open collector inverters are used for turning on/off programming voltage and Vdd and for transferring data between PC and PIC. Transistors T1 and T2 are used as the switches for turning on/off supply voltage Vdd and programming voltage Vpp. LED D1 and D2 are for indication in which state the programmer is (ready the green LED lights, programming - red LED lights) On teh picture below you can see suggestion for one-sided PCB, which can be easily made by yourself. Connection between P16PRO hardware and PC can not be longer than two meters. If you have problems by programming (Programming Failure) and you have a new 486 or pentium motherboard with LTP port on motherboard, then you must connect an additional ceramic capacitor (330 to 470 pF) between ground and pin RB7 on TEXTOOL or you can add additional pull-up resistor (4k7) to ACK line and +5V. ===Schematic=== [[Image:cir_pic_prog_p16pro.gif]] ===PCB=== [[Image:cir_pic_prog_p16pro_pcb.gif]] ==Software== [http://www.circuitsarchive.org/files/picprog.zip Download schematic and software]. ===PICALL Software DOS version=== works under DOS, WINDOS 3.1 and WINDOWS 9x.<br /><br />Range of PIC's Covered:<br />PIC16C54, PIC16C55, PIC16C56, PIC16C57, PIC16C58 + all as P16PRO<br />PIC12C5xx, PIC14000, PIC16C554, PIC16C556, PIC16C558, PIC16C61, PIC16C62, PIC16C62A, PIC16CR62, PIC16C63, PIC16C64, PIC16C64A, PIC16CR64, PIC16C65, PIC16C65A, PIC16C66, PIC16C67, PIC16C620, PIC16C621, PIC16C622, PIC16C710, PIC16C71, PIC16C711, PIC16C72, PIC16C73, PIC16C73A, PIC16C74, PIC16C74A, PIC16C76, PIC16C77, PIC16F83, PIC16CR83, PIC16C84, PIC16F84, PIC16CR84, PIC16F87x, PIC16C923, PIC16C924, PIC16C642, PIC16C662, PIC16C715... <br /><br /><br />And you can simply add new devices by changing '''DEVICE.INI''' file:<br />(you must enter program size, data size, fuses type and algorithm type) ===PICALL Software Windows version (supports also P16PRO)=== Range of PIC's Covered: PIC16C54, PIC16C55, PIC16C56, PIC16C57, PIC16C58 + all as P16PRO<br />PIC12C5xx, PIC14000, PIC16C554, PIC16C556, PIC16C558, PIC16C61, PIC16C62, PIC16C62A, PIC16CR62, PIC16C63, PIC16C64, PIC16C64A, PIC16CR64, PIC16C65, PIC16C65A, PIC16C66, PIC16C67, PIC16C620, PIC16C621, PIC16C622, PIC16C710, PIC16C71, PIC16C711, PIC16C72, PIC16C73, PIC16C73A, PIC16C74, PIC16C74A, PIC16C76, PIC16C77, PIC16F83, PIC16CR83, PIC16C84, PIC16F84, PIC16CR84, PIC16F87x, PIC16C923, PIC16C924, PIC16C642, PIC16C662, PIC16C715... <br /><br />Only PICALL hardware supports:<br />Range of [http://www.atmel.com '''ATMEL AVR's''']. Covered: AT90S12000, AT90S2313, AT90S4414 and AT90S8515<br />Range of Serial EEPROM's. Covered: 24C01, 24C02, 24C04, 24C08, 24C16, 24C32, 24C64, 24C65, 24C128 <br /><br />Software works under WINDOS 3.1x and WINDOWS 9x and conditionaly under Windows NT / Windows 2000 ===P16PRO Software=== The software is an almost universal parallel port programmer for a variety of [http://www.microchip2.com Microchip Midrange Microcontrollers ]. <br />P16PRO Software for DOS works also under WINDOS 3.1 and WINDOWS 9x.<br />Range of PIC's Covered:<br />PIC12C5xx, PIC14000, PIC16C554, PIC16C556, PIC16C558, PIC16C61, PIC16C62, PIC16C62A, PIC16CR62, PIC16C63, PIC16C64, PIC16C64A, PIC16CR64, PIC16C65, PIC16C65A, PIC16C66, PIC16C67, PIC16C620, PIC16C621, PIC16C622, PIC16C710, PIC16C71, PIC16C711, PIC16C72, PIC16C73, PIC16C73A, PIC16C74, PIC16C74A, PIC16C76, PIC16C77, PIC16F83, PIC16CR83, PIC16C84, PIC16F84, PIC16CR84, PIC16F87x, PIC16C923, PIC16C924, PIC16C642, PIC16C662, PIC16C715 <br /><br />And you can simply add new devices by changing '''DEVICE.INI''' file:<br />(you must enter program size, data size, fuses type and algorithm type) ====P16PRO Light Software==== P16PRO Light Software is provided as FREEWARE, but only for private, non-comercial use !!! (that means at home) You can download the P16PRO Light - FREEWARE for programming PIC16C84 and PIC16F84 - version 1.0 April 1999 ====P16PRO Software Registration==== For registration informations, please read file REGISTER.TXT, which in included in ZIP file.<br /><br />If you want to register online using credit card, please follow links:[http://www.dontronics.com '''Dontronics''']. ==PIC programmers in KIT== '''PICALL and P16PRO PIC programmers - KIT are available by:''' P16PRO in KIT (40 PIN and 18 PIN version) * [http://kitsrus.com DIY ELECTRONIC - HK] * [http://www.dontronics.com/diyk96.html DONTRONIC - Australia] * [http://www.asamicros.com ASA Micros Ltd. - UK] * [http://www.electronics123.com/amazon/ AMAZON electronics, inc - USA] * [http://www.electronicas.com ELECTRONICAS - Europe] * [http://www.qkits.com/serv/qkits/qkitscat/catalog.asp?ccat=PIC QUALITY KITS] And the completed programmer by * [http://www.git-online.de/home/bam-mon BAMBERG & MONSEES GbR - Germany] ==External Links== * [http://www.microchip.com Microchip Technology, The Leading Supplier of RISC Microcontrollers & Serial EEPROM] * [http://www.dontronics.com/dtlinks.html David Tait's PIC Links] * [http://www.ip.co.za/people/kalle/pic/ PIC Micro Zone] * [http://www.geocities.com/SiliconValley/Network/3656 Microchip and Scenix related stuff, free C-compiler for PIC...] * [http://www.haus-am-schueberg.org/Ralf_Pagel PIC16x84 BASIC (german)] * [http://www.dontronics.com/piclinks.html Dontronics PIC links] ==Source== * Bojan Dobaj [http://www.picallw.com http://www.picallw.com] [[Category:PIC]]

Return to PIC Programmer.